Filter
Top Products
_________________________________________________________________________________________
Rotary ironer RI800-16 Technical data for customer service 04/2005
DESCRIPTION
The ironer can iron and press. During ironing the roll turns, during pressing the roll is stationary.
The footswitch has two working functions and one stationary fonction.
In the working position, the ironing plate is swung in, so you can iron or press.
In the idle position, the ironing plate is swung away and the roll is stationary.
The roller has a complete forwards free movement.
The roller is hung up at one side and free at the other.
The rotation of the roll is driven by an electric motor.
The ironing plate is installed on the pressure arm, which by pressing the footswitch moves towards
the roll and by releasing away from the roll.
The movement of the ironing plate is operated by a motor and a gearwheel drive.
The motor for rotating the roller is installed in the head of the roll.
The motor for the tension and releasing is put in in the baseplate.
At the left side of the finger guard, a microswitch is installed for the automati swining away of the
ironing plate.
The footswitch has two microswitches to command the printed circuit board which is installed in the
head of the roll.
In the baseplate you can find two switches to command the roll to swing in and out.
On the ironinghead there is a button to regulate the speed of the rotation.