Filter
Top Products
Ironing temperatures – Ironing tips
cold
Temperature selectors
The two temperature selectors are used to adjust the ironing
temperature to the laundry to be ironed. The individual
temperature levels are marked on the selectors by dot symbols,
which correspond to the international “ironing” care labels.
The dots have the following meanings:
Loundry type Symbol Temperature
Nylon / Rayon ? low
Silk / Wool ? ? medium
Cotton / Linen ? ? ? high
Note:
In the case of mixed fabrics, the ironing temperature is determined by the more delicate fibre.
For example, laundry items consisting of polyacrylic and cotton are ironed on the ??
silk/wool setting, not the cotton setting!
The ironing temperature is correctly set when the dot symbol lines up with the “? ” marking on
the ironing plate cover.
Always start ironing at a lower temperature setting and iron the more delicate fabrics first.
Wait for at least 5 minutes after switching on the heating element, to allow adjustment to the
selected temperature. The same also applies if you subsequently select a higher ironing
temperature.
When ironing small items, you should only switch on one temperature selector. This saves
energy and prevents discolouration of the ironing cloth.
Always ensure that the fabrics are well dampened.
If necessary, place a damp cloth between the plate and the item to be ironed, in order to
protect delicate fabrics.
In the case of fabrics with embroidery and items with buttons, we recommend positioning
these towards the roller, so that the embroidery and buttons are pressed into the roller
covering. This will make the embroidery very malleable and prominent after ironing, and
prevent hard buttons from scraping the smooth ironing plate.
Reset both temperature selectors to the Cold position after ironing.
12