Filter
Top Products
Operator’s controls
with red
pilot light
On/off switch (rocker switch)
The appliance is switched on/off with the on/off switch. The red rocker
switch illuminates when the appliance is switched on.
Temperature selectors
The temperature selectors, which are steplessly
adjustable, are located on the right and left on the ironing
plate. As there are two controllers, it is possible to heat
only half of the ironing plate.
The temperature ranges for the individual fabric types are
shown on the selector buttons with care symbols.
The heating elements are switched off when both
temperature selectors are turned anticlockwise as far
as the stop.
Idle position
Pressing position
Ironing position
Footswitch
The ironing process is controlled with the footswitch. 3
functions are possible:
1. Idle position
The footswitch is
not
pressed down, the ironing plate is
swung away and the ironing roller is stationary. In this
position, the laundry is placed ready and straightened for
ironing on the ironing roller.
2. Pressing position
The footswitch is
halfway
pressed down. The ironing plate is
swung in and the ironing roller is stationary. The laundry is
pressed and heated. As soon as you remove your foot, the
ironing plate swings back.
3. Ironing position
The footswitch is
completely
pressed down. The ironing plate
swings in and the ironing roller turns. As soon as you remove
your foot, the ironing plate swings back and the ironing roller
stops.
Free movement of the ironing roller
To facilitate handling, the ironing roller has a completely forwards free movement.
Speed control
The ironing roller speed control can be adjusted as desired with the control knob, which is
located next to the on/off switch. There are 5 different speeds.
10