Filter
Top Products
Setting up the ironer
release
fold
Setting up the ironer
Unfolding and folding up
Unfold the ironing machine from the transport
position into the working position.
To do this, pull the release lever out and then
press the ironer horizontally, until the release
lever engages in the other detent.
After ironing, fold up the ironer in the reverse order. Let the appliance cool down first!
Feed board
Insert the left side of the feed board into the centre of the ironing roller grid with the pin. Hook
the right side of the feed board (claw) into the bolt from below and let the movable fixing
washer enclose the bottom of the bolt.
If you wish to iron without the feed board, remove it in the reverse order.
Experiment to see whether you prefer to iron with or without the feed board!
Left side of feed board (with pin)
Right side of feed board
(with claw and fixing washer)
Release lever
9