Filter
Top Products
Error Messages 3-3
Troubleshooting
3
Error Message Chart
Error Message Cause Remedy
CLOSE COVER
TOP COVER
The top cover is open. Close the top cover .
CLOSE COVER
OUTPUT TRAY COVER
The OUTPUT TRAY cover is
op
en.
Close the OUTPUT TRAY cover
.
REMOVE PAPER FROM
OUTPUT TRAY
The OUTPUT TRAY is full. Remove the paper from the OUT-
PUT TRAY.
REMOVE PAPER FROM
STACKER
The stack tray is full. Remove the paper from the stack
tr
ay.
UNEVEN STACK
REMOVE STACKER PAPER
/
IF PAPER IS CURLED
PERFORM CURL ADJUST.
1. The paper is curled.
2. Paper on the stack tray is
leant.
Check the message displayed on
t
he host machine (printer) control
panel.
STACK TRAY NOT SET The stack tray is not placed cor-
rectly.
Place the stack tray correctly.
CLOSE GUIDE
STACK GUIDE F. COVER
Front cover is closed without
closing
the front stack guide .
Open the front cover and close
the front stack guide , then
close the front cover.
REMOVE JAMMED PAPER
B
A paper jam occurred in B
section.
Open the top cover and open
the B guide to remove the
jammed paper. Close the guide
an
d the cover, and the printing
will be restarted. *1
REMOVE JAMMED PAPER
A
A paper jam occurred in the A
section.
Open the OUTPUT TRAY cover
and open the A guide to
remove the jammed paper. Close
th
e guide and the cover, and the
printing will be restarted.
2
1
3
D2 E2
D4
D1
D3
B
A
E1
C
D5
When you remove the
sheets from the left
turn-over section, take
care not to be caught
by the roller. Other-
wise, it may lead to
severe injury.
When you remove the
sheets from the stack-
ing section, take care
not to be caught
between the stack
guide and the stack
tray. Otherwise, it may
lead to severe injury.
WARNING
1
2
3
3
1
2