Filter
Top Products
2-6 Removing Sheets
Operating Procedures
2
3 Replace the empty stack tray and close the front cover.
The stack tray will move up automatically.
· After you place the stack tray on the support, remove the handle. (If the handle is
att
ached to the stack tray, you will not be able to close the front cover.)
· Push the stack tray to the rear until it is held by the magnet of the support. If the
stack tray is placed incorrectly, it will not be able to move up.
· If the front stack guide is opened before pulling out the stack tray, make sure to
close the front stack guide before closing the front cover. Stacking operation can-
not be performed with the front stack guide opened.
· Mount the handle to the back of the front cover as shown in the illustration below.
Stack Tray
Support
Handle