Filter
Top Products
1-10 Section Descriptions
Before You Begin
1
[7] Top Cover-OUTPUT TRAY Section
[8] Control Panel
Perform settings and operations for the machine using the controls on this panel.
Top Cover
If any sheets jam in the
entrance section or horizon-
tal transport section, open
this cover and remove the
jammed sheets.
OUTPUT TRAY
By ejecting prints, such as
sample or interrupt prints on
this tray, it enables highly pro-
ductive performance without
interrupting the stacking oper-
ation. The maximum stack
height is 100 mm (3.94".)
When you open the top cover, remove sheets on
the OUTPUT TRAY first, then open the top
cover. Otherwise, the top cover may fall because
of the weight of the sheets on OUTPUT TRAY,
and your finger may be caught.
CAUTION
Error
Enter
Menu
Stack ON/OFF
+//
Stack ON/OFF Button
This button activates or deactivates
stacking. This button is invalid during a
job.
ON: Activate
OFF: Deactivate
When the LED on the left of the button
lights up (green), the stacking function is
active.
LCD Display
This displays status
messages (See
page 1-12 to 1-14) or
error messages
(See page 3-2 to 3-4).
Error Lamp
This lamp lights up or blinks if an error
occurs.
Blinking: An error (paper jam, cover
open, stack tray full) occurs.
Lit: Service call error occurs.
Control Keys
These keys are used to switch the menu
such as curl correction or indicated language
select. (See page 1-13)