Filter
Top Products
24 EN
machineto“Pause”modeinorder
to change the spin speed. New spin
speed can be selected. Spin speed
selection can be changed until the
end of final rinse cycle.
Adding/removing laundry in standby
mode
The door can be opened if the water
level and temperature in the drum is
suitable. “Ready” lamp will flash until the
door is allowed to open. “Ready” lamp
will light up continuously when the door
is allowed to open. Laundry may be
added / taken out by opening the door.
“Ready” lamp goes off if the front door is
not allowed to open for safety reasons.
Door lock
The loading door can not be opened yet
due to safety reasons while the “Ready”
lamp is flashing. The loading door can
be opened once the “Ready” lamp
starts lighting up continuously.
Child-proof lock
Youcanprotecttheappliancefrom
being tampered by children by means
of the child-proof lock. In this case, no
change can be made in the running
program.
The washer is switched to child-lock
by pressing Quick wash and Extra
rinse auxiliary function keys for 3 sec.
Quick wash auxiliary function light will
start flashing. “C on” (Child lock is
activated) label appears on the display
for a short time. The same symbol will
also be displayed whenever any button
is pressed while the appliance is child-
locked.
To deactivate the child-proof lock, press
Quick wash and Extra rinse auxiliary
function buttons for 3 sec. “C OFF”
(Child-proof lock is deactivated) symbol
appears on the display.
Ending the program through
canceling
“Start/Pause/Cancel”buttonispressed
for 3 seconds to cancel the program.
“Ready” warning lamp flashes during
canceling and “End” will appear on the
display.