Filter
Top Products
9 - EN
Connect the terminal labeled N and the
Ground terminal labeled G with the supplied
short cable. Tighten the terminals so that they
securely hold the conductors.
9. Attach the two remaining power cord
outer conductors to the 2 terminals labeled
L. Tighten both screws so that the power
conductors are securely held in place.
10. Tighten the strain relief so that the power
cord cannot be moved.
11. Replace the cover on the junction box and
fasten in place.
The dryer is now ready to be plugged into the
3-wire receptacle of the proper rating.
The receptacle should be located so that the
plug and receptacle will be accessible with the
dryer in its installed position.
Grounding Instructions
This appliance must be grounded. In the event
of malfunction or breakdown, grounding will
reduce the risk of electric shock by providing
a path of least resistance for electric current.
This appliance is equipped with a cord having
an equipment-grounding conductor and a
grounding plug. The plug must be plugged
into an appropriate outlet that is properly
installed and grounded in accordance with all
local codes and ordinances.
• Power cord plug must be within easy reach
after installation.
• The voltage and the allowed fuse/breaker
protection are specified in the section
“Technical Specifications”.
• The stated voltage must match your mains
voltage.
• Connection via extension cords or multi-
plugs should not be made.
• The main fuse/breaker and switches must
have a contact distance of minimum 3 mm.
B A damaged power cable must be
replaced by a qualified electrician.
A WARNING – Improper connection of
the equipment-grounding conductor can
result in a risk of electric shock. Check
with a qualified electrician or service
representative or personnel if you are
in doubt as to whether the appliance is
properly grounded. Do not modify the
plug provided with the appliance: if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
B The appliance must not be operated
unless it is repaired! There is the risk of electric
shock!
Appropriate installation
location
•Install your appliance in environments that
have no risk of freezing and in a stable and
level position.
•Do not place your appliance on a long pile
rug or on similar surfaces.
•Operate your appliance in a well-ventilated,
dust-free environment.
•Do not block the air ducts in front of and
under the machine.
B Make sure that your appliance is not
placed on the power cable.
A Keep at least 0.6” (1.5 cm) from the edges
of other furniture.