Blomberg DV 17542 Clothes Dryer User Manual


 
11 - EN
be placed on top of a washing machine, the
approximate weight together may reach 397
lbs (180 kg) when they are full. Therefore,
the floor must be capable of carrying the load
placed on it!
Adjusting the feet
In order to ensure that your
appliance operates more
silently and vibration-free,
it must stand level and
balanced on its feet. The
front feet of the appliance can be adjusted.
Balance the appliance by adjusting the feet.
1. Loosen the feet by hand.
2. Adjust them until the appliance stands level
and firmly.
CDo not use any tools to loosen the
adjustable feet. Otherwise, they may be
damaged.
CNever unscrew the adjustable feet from their
housings.
2 plastic pieces supplied together with the
Operating Instructions prevent your appliance
from slipping on wet and slippery surfaces. To
install these plastic parts:
1. Tilt the appliance backwards.
2. Fit the plastic parts to the front adjustable
feet. Press on the plastic parts to fix them in
their places.
3. Check the balance of the appliance again
and readjust the adjustable feet if necessary.
Ventilation duct and
connection
Ventilation duct ensures exhaust of air from
inside the appliance.
The vented dryer has 1 air outlet.
AOnly rigid or flexible metal duct should be
used for exhausting, unless the appliance has
been checked for use with nonmetallic duct
or the duct has been checked and found
acceptable for use with clothes dryers.
• In Canada, the diameter of the duct to be
used should be 4” (102 mm). In United States,
the regulation for the required exhaust duct
diameter must be followed.
Maximum duct length is given in the table
below:
Metal rigid duct
Maximum length 21 ft (6.5 m) + 2 elbows
To connect a ventilation duct;
1.Connect the air outlet metal duct to the
spacer by turning it counter-clockwise.
2.Make the duct passages as shown the
picture below.
CExhaust of humid air from the dryer into
the room is to be avoided. It may damage the
walls and furniture in the room.
CThe ventilation duct can be routed outdoors
via a window or it can be connected to the air
outlet in a bathroom.
CAir outlet duct must be extended directly
outdoors. There must be a limited number of