Beko WMB91242LC Washer User Manual


 
22 - EN
Changing the selections after the
program has started
The selected spin speed and program
temperature fade out. An empty frame
appears.
Whenthe“Programselection”buttonis
brought to the appropriate position, rpm
and temperature data reappear.
Switching the machine to
standby mode
The machine is switched to standby
modebypressing“Start/Pause/Cancel”
button momentarily. The Standby symbol
which indicates the machine is in standby
mode lights up and the start symbol that
shows the program has started and is still
continuing fades out.
F2
F4
F1
F3
Selecting or canceling an auxiliary
function in pause mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
program is at.
Adding/removing laundry in pause
mode
The door can be opened if the water level is
suitable. The door locked symbol will light
up until the door is suitable for opening. This
symbol will fade out as soon as the door is
allowed to open. Laundry may be added /
taken out by opening the door.
Door lock
The Door Locked Symbol lights up when
the loading door is locked. This symbol will
flash until the door is allowed to open. Do
not force the door at this stage. This symbol
will fade out as soon as the door is allowed
toopen.Youmayopenthedoorafterthe
symbol fades out.
Child-proof lock
Protecttheappliancefrombeingtampered
by children by means of the child-proof lock.
In this case, no change can be made in the
running program.
C
Yourmachinecanbeturnedonand
offwithOn/Offbuttonwhilethechild-
proof lock is activated. In this case, your
machine will resume its program with
child-proof lock activated.
The machine is switched to child-lock by
pressing the 2nd and 4th auxiliary functions
for3sec.“C:on”(Child-prooflockis
activated)labelappearsonthedisplay.
The same symbol will also be displayed
whenever any button is pressed while the
machine is child-locked.
To deactivate the child-proof lock, press the
2nd and 4th auxiliary function buttons for 3
sec.
“C:OFF”(Child-prooflockisdeactivated)
label appears on the screen.
Ending the program through
canceling
“Start/Pause/Cancel”buttonispressed
for 3 seconds to cancel the program.
Start symbol will flash during cancellation.
After cancellation, the symbol of the
corresponding step at which the
cancellation was made will remain lit and
End”willappearonthescreen.
Program in rinse hold mode
This process is shown with the flashing
Spin Symbol and the lit up Standby
Symbol.
If you wish to spin when the machine is in
thismode: