Beko WMB91242LC Washer User Manual


  Open as PDF
of 40
 
18 - EN
Spin Speed selection
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator.
To decrease the spin speed, press the
“Spin”button. Spin speed decreases
gradually. Then, rinse hold and no spin
options are shown respectively.
Rinse hold is shown with “
”andnospin
is shown with “
”symbols.
F2
F4
F1
F3
If you are not going to unload your clothes
immediately after the cycle, you may use
rinse hold function in order to prevent your
clothes become wrinkled when there is no
water in the machine. With this function,
your laundry is kept in the final rinsing water.
If you want to spin your laundry after the
rinseholdfunction:
- Adjust the spin speed.
- Press“Start/Pause/Cancel”button.
Programresumes.Yourmachinedrains
the water and spins your laundry.
Youcanusenospinfunctioninorderto
drain the water without spinning at the end
of the program.
 previous next