Filter
Top Products
26
EN
cancelled remains lit. "End" appears on the
display and the programme is cancelled.
C
If you want to open the loading door
after you have cancelled the programme
but it is not possible to open the
loading door since the water level in
the machine is above the loading door
opening, then turn the Programme
Selection knob to Pump+Spin
programme and discharge the water in
the machine.
Machine is in Rinse Hold mode
Spin symbol flashes and Pause symbol
illuminates when the machine is in Rinse
Hold mode.
If you want to spin your laundry when the
machine is in this mode:
Adjust the spin speed and press Start /
Pause / Cancel button. Pause symbol
disappears and Start symbol appears.
Programme resumes, discharges the water
and spins the laundry.
If you only want to drain the water without
spinning:
Just press Start / Pause / Cancel button.
Pause symbol disappears. Start symbol
appears. Programme resumes and
discharges the water only.
End of programme
“End” appears on the display at the end of
the programme. Symbols of the programme
steps remain lit. Auxiliary function, spin
speed and temperature that were selected
at the beginning of the programme remain
selected.