Filter
Top Products
25
EN
Spin
Appears at the beginning of the final spin step
and remains lit during Spin and Pump special
programmes.
C
If the machine does not pass to the
spinning step, Rinse Hold function might
be active or the automatic unbalanced
load detection system might be activated
due to the unbalanced distribution of the
laundry in the machine.
Loading door lock
There is a locking system on the loading
door of the machine that prevents opening
of the door in cases when the water level is
unsuitable.
Door Locked symbol appears when the
loading door is locked. This symbol will flash
until the loading door becomes ready to open
when programme completes or the machine
is paused. Do not force to open the loading
door in this step. Symbol disappears when
the door is ready to open. You can open the
door when the symbol disappears.
Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause / Cancel button to
switch the machine to pause mode. Pause
symbol appears on the display indicating
that the machine is paused. Start symbol
disappears.
F2
F4
F1
F3
Changing the speed and temperature
settings for auxiliary functions
Depending on the step the programme has
reached, you may cancel or activate the
auxiliary functions; see, "Auxiliary function
selection".
You may also change the speed and
temperature settings; see, "Spin speed
selection" and "Temperature selection".
Adding or taking out laundry
1. Press the Start / Pause / Cancel button to
switch the machine to pause mode. The
programme follow-up light of the relevant
step during which the machine was
switched into the pause mode will flash.
2. Wait until the Loading Door can be
opened.
3. Open the Loading Door and add or take
out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions,
temperature and speed settings if
necessary.
6. Press Start / Pause / Cancel button to
start the machine.
C
The loading door will not open if the water
temperature in the machine is high or the
water level is above the door opening.
Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
C
You can switch on and off the machine
with On / Off button when the Child
Lock is active. When you switch on the
machine again, programme will resume
from where it has stopped.
To activate the Child Lock:
Press and hold 2
nd
and 4
th
Auxiliary Function
buttons for 3 seconds. “Con” appears on the
display.
C
Same phrase will appear on the display if
you press any button when Child Lock is
enabled.
To deactivate the Child Lock:
Press and hold 2
nd
and 4
th
Auxiliary Function
buttons for 3 seconds. “COFF” appears on
the display.
C
Do not forget to disable the child lock
at the end of the programme if it was
enabled before. Otherwise, machine will
not allow to select a new programme.
Cancelling the programme
Press and hold Start / Pause / Cancel button
for 3 seconds. Start symbol flashes. Symbol
of the step at which the programme was