Filter
Top Products
ASUS TUSL2-C User’s Manual72
4. BIOS SETUP
4. BIOS SETUP
Power Up Control
Wake On PS2 KB/PS2 Mouse/CIR [Disabled]
Set this field to [Enabled] if you wish to use your PS2 keyboard, PS2 mouse,
or consumer IR device to power up your computer. This feature requires an
ATX power supply that can supply at least 300mA on the +5VSB lead. The
default is set to [Disabled] because not all computers have the appropriate
ATX power supply. Your computer will not power ON if you set this to
[Enabled] and do not have the appropriate ATX power supply. Configura-
tion options: [Disabled] [Enabled]
Wake Up By Keyboard [Space Bar]
When the previous setup item Wake On PS2 KB/PS2 Mouse/CIR is en-
abled, you may specify the key(s) to press to power up the computer. Con-
figuration options: [Space Bar] [Ctrl-Esc] [Power Key]
Wake On USB for STR State [Disabled]
This field allows you to use your USB device/s, if any, to power up the
computer from Suspend-to-RAM mode. This feature requires an ATX power
supply that can supply at least 2A on the +5VSB lead. The default is set to
[Disabled] because not all computers have the appropriate ATX power sup-
ply. Your computer will not power on if you set this to [Enabled] and do
not have the appropriate ATX power supply. NOTE: This feature must be
set in conjunction with USB Device Wake Up in 3.4 Motherboard Set-
tings. Configuration options: [Disabled] [Enabled]
Automatic Power Up [Disabled]
This allows an unattended or automatic system power up. You may config-
ure your system to power up at a certain time of the day by selecting [Ev-
eryday] or at a certain time and day by selecting [By Date]. NOTE: Auto-
matic Power Up will not work if the system is powered down by operating
systems, such as Windows 98, which have ACPI support enabled. Con-
figuration options: [Disabled] [Everyday] [By Date]