ASUS TUSL2-C User’s Manual
3. HARDWARE SETUP
18
Motherboard Settings
3. H/W SETUP
Motherboard Feature Settings
The motherboard’s onboard functions are either adjusted through jumpers or
DIP switches. When using DIP switches, the white block represents the switch
position. The example below shows all the switches in the OFF position.
TUSL2-C
®
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection.
TUSL2-C DIP Switches
DSW
ON OFF
ON
12345
1) JumperFree™ Mode (JEN)
This jumper enables or disables the JumperFree™ mode. The JumperFree™
mode allows processor settings to be made through the BIOS setup (see 4.4
Advanced Menu).
NOTE: In JumperFree™ mode, all dip switches must be set to OFF.
Setting JEN
Disable (Jumper) [1-2]
Enable (JumperFree) [2-3] (default)
TUSL2-C
®
TUSL2-C JumperFree™
Mode Setting
JEN
DSW
ON
12345
OFF
Disable
12
Enable
2
3
JumperFree Mode
(Default)
Jumper Mode
JEN