Filter
Top Products
ASUS TUSL2-C User’s Manual 17
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
3.3 Hardware Setup Procedure
Before using the computer, it is necessary to complete the following steps:
• Check Motherboard Settings
• Install Memory Modules
• Install the Central Processing Unit (CPU)
• Install Expansion Cards
• Connect Ribbon Cables, Panel Wires, and Power Supply
3.4 Motherboard Settings
WARNING! Computer motherboards and expansion cards contain delicate
Integrated Circuit (IC) chips. To protect them against damage from static
electricity, take precautions whenever working on the computer.
1. Unplug the computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do
not have one, touch both hands to a safely grounded object or to a metal object,
such as the power supply case.
3. Hold components by the edges and try not to touch the IC chips, leads or
connectors, or other components.
4. Place components on a grounded antistatic pad or on the bag that came with the
component whenever the components are separated from the system.
5. Ensure that the ATX power supply is switched off before plugging in or
removing the ATX power connector on the motherboard.
TUSL2-C Onboard LED
ON
OFF
Standby
Power
Powered
Off
PLED2
TUSL2-C
®
WARNING! Make sure the power supply is inplugged when adding or
removing system components. Failure to do so may cause severe damage to
the motherboard, peripherals, and/or components. The onboard LED when lit
acts as a reminder that the system is in suspend or soft-off mode and not pow-
ered OFF.