Filter
Top Products
ASUS TUSL2-C User’s Manual 19
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
2) USB Device Wake Up (USWR01, USWR56)
These jumpers disable or enable the USB device wake up function. Set these
jumpers to Enable to wake up the computer with USB devices. This
feature requires an ATX power supply that can supply at least 2A on the +5VSB
lead. The default is set to Disable because not all computers have the appropriate
ATX power supply. The computer will not power ON if the jumper is set to
Enable and if the wrong ATX power supply is connected. NOTE: This jumper
must be set in conjunction with Wake On USB for STR State in 4.5.1 Power Up
Control.
NOTES
1. For enabling Wakeup during STR/STD/Soft off functions, set to Enable.
2. The total current consumed must NOT exceed the power supply capability
(+5VSB) whether under normal working conditions or in the sleep mode.
Setting USWR01, USWR56
Disable [1-2] (default)
Enable [2-3]
TUSL2-C
®
TUSL2-C USB Device Wake Up
USBPWR01
USBPWR56
Disable
(Default)
1
2
Enable
2
3
Disable
(Default)
12
Enable
23