Filter
Top Products
ASUS TUSL2-C User’s Manual 21
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
5) Voltage I/O Setting (VIO)
This jumper sets the voltage supplied to the DRAM, chipset, AGP, and PCI. The
default setting of 3.40V should be used unless processor overclocking requires a
higher voltage.
Setting VIO
3.30 V [1-2]
3.40 V [2-3] (default)
3.60 V [3-4]
TUSL2-C
®
TUSL2-C VIO Setting
VIO
3.30 V 3.40 V
12
2
3
3.60 V
3
4
(Default)
WARNING! Using a higher voltage may help when overclocking but may result
in the shortening of your computer component’s life. It is highly recommended
that you leave this setting on its default.