Filter
Top Products
36
Customer Care Center
1-800-898-1879
www.askousa.com
Electrical requirements
The following are important instructions and information concerning the exhaust requirements
for your dryer.
To reduce the risk of fire, electric shock, or injury to person, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this appliance. To reduce the risk of fire, combustion, or
accumulation of combustible gases, DO NOT exhaust dryer air into an enclosed and
unventilated area, such as an attic, wall, ceiling, crawl space, chimney, gas vent, or concealed
space of a building. To reduce the risk of fire, DO NOT exhaust the dryer with plastic or thin foil
ducting.
Deduct 6 feet (1.8 m) for each additional elbow. It is not recommended to use more than 4 90°
elbows.
Important Warning!
Note!
Maximum length of 4”
(10.2 cm) diameter rigid
metal duct
65 feet (19.8 m)
55 feet (16.8 m)
47 feet (14.3 m)
36 feet (11.0 m)
28 feet (8.5 m)
55 feet (16.8 m)
47 feet (14.3 m)
41 feet (12.5 m)
30 feet (9.1 m)
22 feet (6.7 m)
Maximum length of 4”
(10.2 cm) diameter
flexible metal duct
45 feet (13.7 m)
35 feet (10.7 m)
30 feet (9.1 m)
25 feet (7.6 m)
20 feet (6.1 m)
35 feet (10.7 m)
27 feet (8.2 m)
21 feet (6.4 m)
17 feet (5.2 m)
15 feet (4.5m)
Number of
90° Elbows
0
1
2
3
4
0
1
2
3
4
Weather Hood
Type
Recommended
Use Only for Short RunInstallations