Filter
Top Products
14
Customer Care Center
1-800-898-1879
www.askousa.com
Selecting Settings
Dry Sensor
• Use these buttons to set dry level.
• First, select the Sensor Dry program.
• Select dry level to adjust how much you
want to dry the load. As the program runs,
the control senses the dryness of the load
and adjusts the time automatically based on
the selected dryness level.
Dry Sensor selections can only be made
while using the Sensor Dry programs.
Selecting “more dry” or “less dry”
automatically adjusts the preset times for the
manual dry programs.
Temp.
Use the Temp. option to select temperatures
for the Manual Dry programs. Press Temp.
until the desired temperature setting glows.
You can't change temperatures on sensor dry
programs. Temperature is set by the
program.
Dry Time
Use Dry Time option to change drying time
per your preference. When choosing Dry
Time, the temp is always set to "High" by
default however temperature can be changed
per your desire setting.
You can select the desired operation time
manually by pressing the Dry Time button
between 20 to 60 minutes.
Signal
The Signal controls the volume of the beep
that is made when you press any of the
buttons at the end of the cycle.
Press Signal to adjust the sound level or turn
off the signal.
Note!