Filter
Top Products
16
Customer Care Center
1-800-898-1879
www.askousa.com
Selecting Options
Time change is available only with Manual
dry, Dry Time and Rack dry programs.
Damp Signal
When you select the Damp Signal option, a
beep will alert you when your load is just
damp enough for ironing or pressing. This
notice will allow you to remove lightweight
items that are dried or other items that you
may wish to iron.
Anti-crease
This option helps to prevent wrinkles on your
laundry. When you select the Anti-crease
option, the drum will periodically rotate until
you press the Power button, Start/Stop
button, or open the door. You can use this
option in case you cannot remove laundry
immediately after drying is done.
Delay Start
When you select Delay Start, the machine
will start between 1 and 12 hours after you
press the Start/Stop button.
• Press the Delay Start button the same
number of times as the number of hours by
which you want to delay the start (1~12
hours).
• The number of hours of delay start you have
selected will be shown in the display.
• Press the Start/Stop button.
• The number of hours to start is displayed
with a countdown one hour at a time.
• Cancel Delay Start by pressing power
button and turning the machine off.
• Turn the power back on, select a program
and press the Start/Stop button.
Remember to press the Start/Stop button to
start the program.
Child Lock
*
The child lock option can be used to prevent
a child from pausing or cancelling a dry
program once it has been started. To set this
option, you must first select a dry program
and any desired options. Press the Start/Stop
button to start the cycle. Next, press the Child
lock button for 3 seconds to engage the Child
lock option. Child lock will be lit up as long as
the option is active. To cancel this mode, hold
the Child lock button again for 3 seconds, and
turn off the main power button. You will have
to set the Child Lock option at the beginning
of every cycle you choose to have protected.
Estimated Time Remaining
The display shows the estimated time
remaining. In addition to this, if the dryer has
some problem, it displays error messages.
Refer to Trouble shooting guide.
Important!Note!