Filter
Top Products
Page 7
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
STST
STST
ST
AA
AA
A
CKED INSTCKED INST
CKED INSTCKED INST
CKED INST
ALLAALLA
ALLAALLA
ALLA
TIONTION
TIONTION
TION
ASKO dryers can be mounted on top of any matching
ASKO washer. Mounts are supplied with the machine.
The metal brackets are attached to the lower back of
the unit. The plastic cups are packed inside the dryer.
Two metal brackets for
securing the dryer to
the washer
Two plastic cups to
secure the dryer legs.
To install the dryer on top of the washer, follow the steps
below:
1. Remove the two outside screws (20 torx) from the
back of the washer and use them to secure the metal
brackets, as illustrated.
2. To ensure the dryer is correctly positioned on top of
the washer, align the plastic cups with the front top
edge of the washer.
3. Remove the protective
paper from the self-
adhesive surface
beneath the cups. Being
careful not to press the
adhesive surface against
the top of the washing
machine, use the tabs to
position the cups (as illustrated) then press them
firmly into place.
4. Once the cups are in place, break off the remaining
plastic tabs.
5. Lift the dryer into
position. Raising the
front edge, push the
dryer backwards until it
engages with the
brackets on the back of
the washer.
To position the plastic cups, break off the left tab (A)
on the cup to be placed on the right side of the washer
and break off the right tab (B) on the cup to be placed
on the left side of the washer.
Washer
back
Tumble dryer
Washer
Metal brackets
6. Carefully lower the front
of the dryer, making sure
the feet fit into the plastic
cups.
Stacked InstallationStacked Installation
Stacked InstallationStacked Installation
Stacked Installation
WARNING!
Never stack a washer on top of a dryer!
Total height 67”.
Adjustable to 69”.
Plastic cups