Filter
Top Products
Page 15
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
NAVIGATING THE MENUS
The following paragraphs explain how to navigate
through the menus and change the preset programs.
If you don’t want to make changes in all of the menus,
continue to press MENU until the one you do want to
change displays.
To restore a preset program to its original settings, simply
press the button for the preset program (P1–P4) you
want to restore and hold it down while you press ENTER.
The program will revert to its original settings.
We recommend that you make two or three trial changes
to understand how easy it is to customize these
program.
If you change your mind in the process of changing a
program, press the Power button to switch the washer
off. When you switch the power back on, the program
will be as originally set.
Remember, the first step to customizing a preset
program is to press the button for the program
you want to customize (P1–P4).
The Program Menu
The Program menu lets you set the dry program you
prefer. You would also use this menu to set the machine
for a Timed Dry or Air Fluff program. (See “Timed Dry
and Air Fluff” on page 16.)
1. Press MENU until “Select Program” displays.
2. Press
to scroll through the program choices
(Extra Dry, Dry, Normal, etc.)
3. When your preference displays, press ENTER. The
LCD will display the new program setting.
4. Press ENTER again to permanently save your
program setting.
Timed Dry and Air Fluff
When you select Timed Dry or Air Fluff on the program
menu, the word “Time” and a number (of minutes) will
flash in the upper right corner of the LCD window. This
indicates you must select a program time (5 to 90
minutes in 5-minute increments).
1. Press MENU until “Select time” displays.
2. To change the number, simply press an Arrow button
until the length of time you want the program to run
displays.
3. Press ENTER to program your change.
4. Press ENTER again to permanently save your
program setting.
When you press START, the time remaining for the
program to run displays in the bottom right-hand corner
of the LCD window, as illustrated below:
The remaining time toggles between the minutes
remaining (e.g., 23) and the hour(s) remaining (e.g.,
1h).
PRPR
PRPR
PR
OGRAMMING INSTROGRAMMING INSTR
OGRAMMING INSTROGRAMMING INSTR
OGRAMMING INSTR
UCTIONSUCTIONS
UCTIONSUCTIONS
UCTIONS
Below are the basic instructions for changing a preset program. The following paragraphs explain the programming
menus and options and how to navigate through them.
1. Press the button for the preset program you
want to change (P1–P4). The program you
select will display in the lower left corner of the
LCD window.
2. Press MENU until the one you want to change
displays (e.g., Programs, Temperature, etc.).
3. Press
to scroll through the available options
or to toggle between off and on.
5. Press ENTER to save you settings and return
to the Main Program screen. The LCD will display your new settings.
6. Press ENTER again to permanently save your settings. (Otherwise, the machine will revert back to the previous
settings when the program ends.