Filter
Top Products
32
WARNING: DO NOT OBSTRUCT THE FLOW OF COMBUSTION AIR and VENTILATION
AIR.
WARNING: INSPECT and REMOVE ANY LINT ACCUMULATION WHICH CAN CAUSE
THE BACK DRAFT DAMPER TO BIND or STICK.
NOTE: A back draft damper that is sticking partially closed can result in slow drying and shut down of
the heat circuit safety switches and/or thermostats.
NOTE: When cleaning dryer cabinet(s), avoid using harsh abrasives. A product intended for the
cleaning of appliances is recommended.
B. ADJUSTMENTS
7 DAYS AFTER INSTALLATION and EVERY 6 MONTHS THEREAFTER
Inspect bolts, nuts, screws, (bearing set screws), non-permanent gas connections (unions, shut-off valves,
orifices, and grounding connections) and examine wheels. Motor and drive belts should be examined.
Cracked or seriously frayed belt(s) should be replaced. Tighten loose belts when necessary. Complete
operational check of controls and valves. Complete operational check of ALL safety devices (door switches,
lint drawer switch, sail switch, burner and hi-limit thermostats).