Filter
Top Products
27
c. Additional time can be purchased at any time. If the dryer is in operation (drying mode) and additional
coins are inserted, the L.E.D. (light emitting diode) display(s) will read “PUSH” ... “tEnP,” and the
selection (setting) key for the appropriate tumbler (basket) must be pressed.
NOTE: Any one of the three (3) selection keys can be pressed for the appropriate tumbler (basket).
No matter which key is pressed, the Dual Microprocessor Controller (DMC) computer will
continue the cycle selection time that was in operation at the time of inserting additional coins.
NOTE: When both tumblers (baskets) are in operation and additional coins are inserted for one tumbler
(basket) and the appropriate tumbler (basket) selection is made, the other tumbler (basket)
automatically resumes cycle status.
NOTE: If the Anti-Wrinkle program is active, the L.E.D. (light emitting diode) display will remain
reading “donE,” and the microprocessor controller (DMC) computer will proceed through the
Anti-Wrinkle program until the maximum “Active Guard Time” has expired or until the main
door is opened, whichever comes first.
NOTE: If the Anti-Wrinkle program is not active or in use, the L.E.D. (light emitting diode) display will
read “donE” until the main door is opened, at which time, the L.E.D. (light emitting diode)
display will read “FILL” and/or “FrEE.”
d. Notes
1) The dryer tumbler (basket) can be stopped at any time by opening the main door. To restart dryer,
shut the main door and press desired setting.
NOTE: If the Anti-Wrinkle program is not active or in use, the L.E.D. (light emitting diode) display will
read “donE” until the main door is opened, at which time, the L.E.D. (light emitting diode)
display will read “FILL” and/or “FrEE.”
2) Selection (setting) changes can be made at any time during the drying cycle by opening and closing
the main door then making a new selection.