Filter
Top Products
48
SECTION IX
DATA LABEL LOCATION/INFORMATION
Data Label
Contact American Dryer Corporation
When contacting American Dryer Corporation, certain information is required to insure proper service/parts
information from ADC. This information is on the data label that is located behind the left coin control panel, on
the right wall, (as shown in the illustration above). When contacting ADC please have the model number and
serial number readily available.
The Data Label
1. Model Number
The model number is an ADC number which describes the size of the dryer and the type of heat (gas,
electric, or steam).
2. Serial Number
The serial number allows ADC to gather information on your particular dryer.
3. Manufacturing Code Number
The manufacturing code number is a number issued by ADC which describes ALL possible options on your
particular model.