Filter
Top Products
95
4. Basket (Tumbler) Electrical Component(s)
a. Basket (Tumbler) Thermal Magnetic Starter (T.M.S.) and Auxiliary Contact Block Replacement
1) Discontinue electrical power to the dryer.
2) Mark and identify the wires that will be removed for proper reinstallation.
3) Set the control of the T.M.S. to the “stop” position.
4) Press down on the T.M.S. and lift the bottom up and out of the din mounting rail.
5) Mark and identify the wires that will be removed for proper reinstallation.
6) Remove ALL associated wires.
7) Separate the T.M.S. from the auxiliary contact block.
8) Install new T.M.S. or auxiliary contact block.
9) Reassemble the T.M.S. to auxiliary contact block.
10) Set overload to required setting.