Filter
Top Products
98
REAR SAIL SWITCH CLOSED FAULT - Rear sail switch is closed and should be opened.
REAR SAIL SWITCH OPEN FAULT - Rear sail switch is open and should be closed.
FAN CONTACTOR FAULT - The fan contactor was not pulled in.
FRONT BURNER HIGH LIMIT FAULT - Indicates the temperature disk in the front burner has opened.
REAR BURNER HIGH LIMIT FAULT - Indicates the temperature disk in the rear burner has opened.
FRONT BURNER VALVE FAULT - Indicates front gas valve is not working or no gas is turned on or
flameout.
REAR BURNER VALVE FAULT - Indicates rear gas valve is not working or no gas is turned on or flameout.
FRONT BURNER IGNITION CONTROL FAULT - Front ignition module is not working or failure to
ignite.
REAR BURNER IGNITION CONTROL FAULT - Rear ignition module is not working or failure to ignite.
ROTATION FAULT - Indicates the basket (tumbler) is not rotating.
BAD PROBE - Indicates the temperature probe is open or shorted.
LOW VOLTAGE FAULT - Indicates power has dropped below the operating values and will shut down.
FRONT BURNER PURGE FAULT - The front gas valve signal is present during the prepurge time.
REAR BURNER PURGE FAULT - The rear gas valve signal is present during the prepurge time.
MODEL ERROR, ENTER CORRECT MODEL - The wrong model was selected for the dryer.
EE PROM FAULT ### - Error in memory location. The ### indicates the location of the fault.