Filter
Top Products
66
a) Thermal Magnetic Starter (T.M.S.) Replacement
(1) Discontinue electrical power to the dryer.
(2) Mark L1, L2, L3, and T1, T2, T3 on the wires to the T.M.S. for correct replacement.
(3) Set the amp rating on the T.M.S. according to the manufacturer’s electrical schematic on
the new thermal magnetic starter.
(4) To remove the T.M.S., pull the tab on the bottom and lift upward.
(5) To install the new T.M.S., reverse above procedure (Step #4 thru Step #2).
(6) Reestablish electrical power to the dryer.