Filter
Top Products
51
SECTION XI
MANUAL RESET HI-LIMIT INSTRUCTIONS
I M P O R T A N T
MANUAL RESET HI-LIMIT INSTRUCTIONS
FOR DUAL TIMER OR PHASE 5 WITHOUT HEAT FAULT
This dryer was manufactured with a burner manual reset hi-limit thermostat and a basket (tumbler)/lint
chamber manual reset hi-limit thermostat. If either burner manual reset hi-limit thermostat is open prior to the
start of the drying cycle, or during the cycle, the dryer will not recognize the open state of the burner hi-limit
thermostat and will start or continue through the drying cycle with no heat. Manual reset hi-limit thermostat must
be reset manually.
This hi-temperature condition may be caused due to a restricted exhaust, poor airflow, or improper burner
oven operation.
IMPORTANT
This dryer is equipped with a burner
hi-limit and tumbler/lint chamber hi-limit
thermostat which must be reset manually.
WARNING: Discontinue power to dryer
before attempting to reset hi-limit.
ADC P/N: 114093