Filter
Top Products
42
a. Lint drawer/door switch is not closed ALL the way.
b. Lint drawer/door switch out of proper adjustment.
c. Fail lint drawer/door switch.
d. Failed main door switch.
e. Broken connection/wire in main door or lint drawer/door switch circuit.
4. Failed “PUSH to START” relay.
5. Failed 24 VAC step down transformer or fault in wiring.
6. Failed heat timer.
B. Drive motor is not operating (does not start)...
1. Failed drive motor contactor (relay).
2. Failed drive motor.
C. Drive motor operates okay for a few minutes, and then stops and will not restart...
1. Motor is overheating and tripping out on overload protector ...
a. Motor air vents clogged with lint.
b. Low voltage to the motor.
c. Failed motor.
d. Basket (tumbler) is binding ... check for obstruction.
e. Failed idler bearings or tumbler bearings.
D. Drive motor is not operating (does not start) and indicator light is on...
1. Fault in L1 or L2 termination(s) between terminal block and contactor motor (relay).
2. Failed contactor.
3. Failed motor.
E. Heating unit is not operating (no heat) ... no voltage at heating unit (i.e., gas model - Direct
Spark Ignition [DSI] module)...