Filter
Top Products
46
C. LED Display/Codes
The LED display informs the user of cycle status and program verification and displays important diagnostic
and fault codes.
1. Display Operating Status
a. Cycle in Progress - While the dryer is operating, the display will read which cycle is in progress. For
example, in the drying cycle (mode), the display will read "dr", and in the cool down cycle (mode),
the display will read "CL".
b. Cycle Status - While a cycle is in progress, the display will show the progress of the cycle (load) that
is being processed.
1) Automatic Drying Cycle - The cycle status portion of the display will show the percentage of
extraction.
2) Timed (Manual) Drying Cycle - The cycle status portion of the display will show the drying or
cool down time and will count downward until the programmed time has expired.
c. Alternate Display Programs - Programming allows for the display to read just the cycle in progress
or just the basket temperature or to flash back and forth from cycle in progress to basket temperature
while the dryer cycle is in progress.
d. Indicator Dots - Located at the top of the display is a series of dots which indicate the various
microprocessor controller output functions while a cycle is in progress.
Illus. No. 3 -BLOWER MOTOR INDICATOR -
This indicator dot is on whenever a cycle is in
progress. In addition, when the anti-wrinkle
program is active, this indicator will be on
whenever the microprocessor controller is in
the guard on time program.
Illus No. 4 - HEAT INDICATOR - This indicator
dot is on whenever the microprocessor controller
is calling for the heating unit to be active (on).
1. CYCLE IN PROGRESS
a. dr -- DRYING CYCLE
b. CL -- COOL DOWN CYCLE
2. CYCLE STATUS
a. AUTOMATIC MODE DISPLAYS % OF EXTRACTION
b. MANUAL MODE DISPLAYS DRYING TIME OR COOL DOWN TIME
3. ON INDICATOR, DRYER IS IN OPERATING MODE
4. HEAT ON INDICATOR
5. BASKET IN REVERSE MODE (C.C.W.) INDICATOR
6. BASKET IN FORWARD MODE (C.W.) INDICATOR