Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Basic Installation/Operation
35
F232156
6. Add dry supplies to the supply dispenser
compartment cups prior to the start of each cycle.
Liquid supplies can be injected directly into the
supply dispenser by an external chemical supply
system.
NOTE: Supply dispenser compartment cups must
not be removed when an external chemical
injection supply system is attached to the washer-
extractor.
7. Press the Up or Down keypad until the desired
cycle number is displayed. Press the Start keypad
to start the cycle.
To display the temperature of the water while
cycle is running, press the Up keypad. To display
the number of the cycle in progress, press the
Start keypad.
NOTE: Press keypads at their centers just hard
enough to activate them.
8. Cycle is complete when display reads “
donE”.
NOTE: A cycle can be stopped at any time by
pressing the Stop keypad.