Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Basic Installation/Operation
F232156
16
Table 5 (continued)
UW 3 Speed Models
UW35 UW60
Power Consumption
Average power used per cycle, kWh 0.24 0.47
Max nominal sound emission, dBA 72 81
Average HVAC load, Btu/hr (kcal/hr) 625 (157) 875 (220)
Drive Train Information
Number of motors in drive train 2 2
Wash/reverse motor power, hp (kW) 0.4 (0.3) 0.9 (0.7)
Distribution motor power, hp (kW) 0.45 (0.34) 1.0 (0.8)
High extract motor power, hp (kW) 3 (2.2) 3.5 (2.6)
Cylinder Speeds/Centrifugal Force Data
Wash/reverse speed, RPM / g 45 / 0.76 42 / 0.80
Distribution speed, RPM / g 75 / 2.10 67 / 2.04
High extract speed, RPM / g 597 / 133 561 / 139
Balance Detection
Vibration safety switch installed N/A STD
Safety switch gap setting, in. (mm) N/A 0.006 (0.15)
Direct Steam Heating (Optional)
Steam inlet connection size, in. (mm) 1/2 (13) 1/2 (13)
Number of steam inlets 1 1
Steam required to raise bath temperature,
10°F, lb. (10°C, kg)
LOW 2.1 (1.5) 3.3 (2.4)
MED 2.3 (1.7) 3.7 (2.6)
HIGH 2.7 (1.9) 4.1 (2.9)
Average consumption per cycle, bhp (kg) 1.4 (21.4) 2.1 (33.4)
Electrical Heating (Optional)
Total electrical heating capacity, kW 15.6 25.2
Number of electrical heating elements 6 6
Electrical heating element size, kW 2.6 4.2
Time required to raise bath temperature,
10°F, min. (10°C, min.)
LOW 2.4 (3.6) 2.4 (3.7)
MED 2.7 (4.1) 2.7 (4.1)
HIGH 3.1 (4.7) 3.0 (4.6)
Table 5