Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
29
F232156
Basic Installation/Operation
Operation
UW Models With UniLinc Control
1. When display shows the Cycle Menu Screen
washer-extractor is ready to be loaded with
laundry.
2. On UW35-UW150 models. Press the door
unlock button located on the lower left front on
the control. Refer to Figure 8.
3. Open door within five seconds of pressing the
door unlock keypad.
Figure 8
4. On 35 – 125 models, turn door handle clockwise
and swing the door left to open. Door must be
opened within 5 seconds of pressing the door
unlock button. Refer to Figure 9.
Figure 9
5. On 150 models, turn handle counterclockwise
and swing the door right to open. Door must be
opened within 5 seconds of pressing the door
unlock button. Refer to
Figure 10.
Figure 10
6. Load the washer-extractor to full capacity
whenever possible, but do not exceed the rated
dry-weight capacity of the machine if the fabric
to be washed is quite dense, closely woven, and
heavily soiled.
Overloading can result in an inferior wash. The
operator may need to experiment to determine
load size based on fabric content, soil content,
and level of cleanliness required. Do not
underload the machine. Underloading can result
in premature bearing and sealing failure and out-
of-balance situations.
Figure 11
PHM705N
MD004J
PHM705N
UW35 – UW150 MODELS
UW35 – UW125 MODELS
PHM717N
PHM590N
150 MODELS
W
A
R
N
IN
G
MACHINE M
AY B
E HOT
AND CAUSE BUR
NS
ATTEMPT NO
ENT
RY UNTIL
BASKET HAS STOPPED
SER
IOUS INJURY
MAY
RESULT