Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Basic Installation/Operation
25
F232156
UW 2 Speed Models with P-Control,
S-Control, Mechanical Timer or B-Control
Dimensional Clearances
Allow a minimum of 24 inches (60 cm) at the rear, and
18 inches (45 cm) at the sides for maintenance,
inspection and adjustment. Allow at least 18 inches
(45 cm) between machines in multiple installations.
Machine dimensions are indicated in Figure 6 and
specified in Table 9.
NOTE: The dimensions shown here are for
planning purposes only. They are approximate and
subject to normal manufacturing tolerances. If
exact dimensions are required for construction
purposes, contact the distributor or the
manufacturer. We reserve the right to make
changes at any time without notice.
Table 9
UW 2 Speed Machine Dimensions
(Refer to Figure 6)
Dimensions
35 60
in. mm in. mm
A
30.13 765 35.63 905
B
*
32.5 826 36.63 930
C
23.75 603 28.25 718
D
38.25 972 45 1143
E
0.5 13 1 25
F
55.5 1410 64.5 1638
G
30.5 775 36 914
H
8 203 15.5 394
I
43.88 1114 55 1397
*
Overhang dimensions for the optional starch dispenser are as follows:
UW35, 3.88 inches (9.86 cm); UW60, 1.75 inches (4.45 cm).