Filter
Top Products
Instructions for use
47
Programme security
In order to secure a programme from undesirable changes (e. g. Over-
rotating programme knob, additional pressing of buttons, etc.), it is
possible to set the programme security. This will prevent damage to
your washing.
3
Setting and releasing the Programme security is possible at any time
during a programme.
Setting programme security:
0 1. Set the desired washing programme.
2. Press the START/PAUSE (START/PAUZE, MARCHE/PAUSE) button to start
the programme.
3. Simultaneously press the PREWASH (VOORWAS, PRELAV.) and DELICATE
(BEHOEDZAAM, SENSITIVE) buttons for 5 seconds. Programmecycle
display blinks for 5 seconds;
Programme security is switched On.
3
As long as the programme security is switched On, no other settings
can be made. The door cannot be opened with the
DOOR/LIGHT (DEUR/LICHT, PORTE/ECLAIR.) button. Also, the pro-
gramme security must first be removed after the wash cycle is ended
before the door can be opened.
If an attempt is made during the wash cycle to change the selected
setting by pressing a button, then the programme cycle display will
blink for 5 seconds.
If an attempt is made to change the selected setting by turning the
programme knob, then the programme cycle display will blink until the
programme knob is reset to the original setting. The washing cycle is
not influenced.
3
The programme knob must be in the original positionbefore the
programme security can be released.
Releasing the programme security:
0 Keep the PREWASH (VOORWAS, PRELAV.) and DELICATE (BEHOEDZAAM,
SENSITIVE) buttons depressed simultaneously for 5 seconds. Programme
cycle display blinks for 5 seconds, then lights up constantly for 5 sec-
onds. The programme security is released.