Instructions for use
25
Add Washing Detergent/Care Agent
3
For information on wash and care agent,
see chapter „Washing powder and
care agent“.
0 1. Open the washing detergent drawer:
Reach into the flap at the bottom of the
drawer (1), pull drawer out up to the
stop (2).
2. Fill with washing detergent/care agent.
3. Push drawer all the way in.
3
When using liquid washing agent/Tabs:
liquid washing agent or Tabs with the dosing container provided by the
detergent industry. More instructions on the washing agent packing.
Compartment for In-wash stain
treatment/-tabs
(only for additional programme
STAINS/
VLEKKEN, TACHES)
Compartment for powdered washing
agent/Tabs
(If you are using water softener and
need the right hand compartment for
the pre-wash/softening agent, add the
water softener to the main washing de-
tergent in this compartment).
Compartment for liquid care agent
(Softener, shape rinse, starch)
Caution! Do not fill compartment
above MAX mark. Thick fluid medium
possibly thin to MAX mark,
dissolve powdered starch.
Remarks: A small amount of remaining water in the
compartment for fluid care agent is normal and
does not affect the rinse results.
Compartment for pre-wash agent/soaking agent
(only for additional programme PRE WASH/VOORWAS, PRELAV.)
or for water softener