Filter
Top Products
Instructions for use
45
4. if you want to check whether the water cooling is set:
– Turn the programme knob to SHORT SPIN (KORT CENTRIFUG.,
ESSORAGE DELICAT).
– Press the PRE WASH (VOORWAS, PRELAV.) button briefly.
If the MAIN WASH (HOOFDWAS, LAVAGE) blinks on the programme cy-
cle display, then the water cooling is set.
Cancel water cooling:
0 1. Turn programme knob to SHORT SPIN (KORT CENTRIFUG., ESSORAGE
DELICAT).
2. Keep the PRE WASH (VOORWAS, PRELAV.) button depressed for at least
5 seconds.
Immediately after the button is pressed, MAIN WASH (HOOFDWAS,
LAVAGE) will blink on the programme cycle display. After 5 seconds
MAIN WASH (HOOFDWAS, LAVAGE) will stop blinking and will remain
lit constantly for 5 seconds.
3. Whilst MAIN WASH (HOOFDWAS, LAVAGE) is constantly lit, release the
PRE WASH (VOORWAS, PRELAV.) button. The water cooling is canceled
after MAINWASH (HOOFDWAS, LAVAGE) stops blinking,
3
Due to the water cooling the water consumption and and the pro-
gramme duration increase .
Additional rinse cycle and water cooling
Additional rinse cycle and water cooling can be combined. Setting as
for „Additional Rinse Cycle“ and „Water Cooling“.