Filter
Top Products
Instructions for use
26
Starting the wash program
0 1. Checking whether the water tap is open.
2. Starting the wash programme: Press the
START/PAUSE (START/PAUZE, MARCHE /PAUSE)
button.
The wash programme is started or starts after
end of the set delay time.
3
If the DOOR/LIGHT (DEUR/LICHT, PORTE/ECLAIR.) display lights up red
when pressing the START/PAUSE (START/PAUZE, MARCHE /PAUSE) but-
ton, then the door is not properly closed. Press the door firmly closed
and press the START/PAUSE (START/PAUZE, MARCHE /PAUSE) button
again.
For a set delay time:
the set delay time runs out, in the multi-display the remaining time up
to the start of the programme is displayed (always in full hours). During
this time, you can add washing or change the delay time or abort.
• Adding washing: Press the START/PAUSE (START/PAUZE, MARCHE /
PAUSE) button. The door can be opened. Then close the door and
press the START/PAUSE (START/PAUZE, MARCHE /PAUSE) button
again.
• Changing the delay time or aborting: Press the DELAY TIMER (START-
TIJDKEUZE, DEPART DIFFERE) button until the desired time is dis-
played; With a display of the programme duration (display in
minutes, e. g. 120) the wash programme starts immediately.