Filter
Top Products
Instructions for use
20
Carrying out a wash cycle
Brief instructions
A wash cycle is carried out in the following steps:
0 1. Setting the correct wash programme:
– Set programme and temperature with the programme knob,
– If necessary, select additional programme.
2. PossiblyChange spin speed, select /RINSE STOP (GEEN CENTR., SANS
ESSOR.).
3. Possibly set DELAY TIMER (STARTTIJDKEUZE, DEPART DIFFERE).
4. Open door, put in washing,
5. Close door.
6. Washing-/Add conditioner.
7. Start the wash programme with the START/PAUSE (START/PAUZE,
MARCHE/PAUSE) button.
After completion of the wash programme:
Caution! if the wash cycle ends with Rinse Stop, carry out PUMP OUT
(POMPEN, VIDANGE), SPIN (CENTRIFUG., ESSORAGE) or SHORT SPIN
(KORT CENTRIFUG., ESSORAGE DELICAT) before opening the door.
8. Open door, remove washing.
9. Switch washing machine Off: Set programme knob to OFF (UIT, ARRET).