Filter
Top Products
Operating Instructions
25
Completion of the Washing Program
Program sequence display
Before the start, the program steps to be
carried out are indicated by the Program se-
quence display. The current program
step is displayed during the wash program.
Multi-display
The expected remaining run time (in minutes)
is shown in the multi-display until the program
ends.
3
With automatic program adaptation by the controller of the washing
machine (quantity of washing, type of washing, imbalance recognition,
special rinse etc.), it is possible to stop or correct the counting of the
remaining run time.
Change the Spin Speed
During the wash program, the spin speed can still be changed or RINSE
HOLD can be set.
Other settings cannot be changed.
Abort program
0 To prematurely abort the washing program, turn the program selector
to OFF.
3
With the button START/PAUSE, it is possible at any time to interrupt
the washing program and to continue it again by pressing the button
again.