AEG 70330 Washer User Manual


 
Installation and connection instructions
39
Installation of the appliance
3
Washing machines with curved panels are not suitable for installing
under units.
Transporting the appliance
Do not place the washing machine on its front or on its right side
(viewed from the front). Otherwise, electrical components can get
wet.
Never transport the unit without the transport safeguard. Do not re-
move the transport safeguard until the appliance is at the installation
location. Transporting the unit without the transport safeguard can
damage it.
Lift the appliance neither by an open filling door nor by the base.
When transporting the unit with a sack trolley: Attach the sack trol-
ley only at the side.
Remove transportation protection
Important! It is essential to re-
move the transport safeguard be-
fore putting the unit into
operation. Keep all parts of the
transport safeguard in a safe
place for possible later transport
(moving).
0 1. Open both hose holders on the
unit's rear side and remove the
hoses and mains cable.