Filter
Top Products
Operating Instructions
17
Run a Washing Cycle
Brief Instructions
A washing cycle is run in the following steps:
0 1. Set the correct washing program:
– Set the program and temperature with the program selector
– Set any additional program(s)
2. If necessary, change the spin speed/select o (RINSE HOLD).
3. Open the filling door and fill with washing.
4. Close the filling door.
5. Add washing detergent/care agent.
6. Start the washing program with the O/s (START/PAUSE) button.
After the Washing Program Ends:
Attention! If the washing cycle ended with Rinse Hold, before opening
the filling door carry out C (PUMP), D (SPIN) or F (SHORT SPIN).
7. Open the filling door and remove the washing.
8. Switch off the washing machine: Set the program selector to I (OFF).