Filter
Top Products
Operating Instructions
32
Conditioner not added,
compartment æ for
care agent full of wa-
ter.
Softener insert in the com-
partment for care agent not
correctly attached or is
blocked.
Clean the detergent drawer
and firmly attach the sof-
tener insert.
Washing heavily
creased.
Too mush washing probably
put in.
Pay attention to the maxi-
mum filling quantity (see
”Program Tables”).
For easy-care textiles, select
the program < (EASY
IRON).
Washing not well spun.
Residual water still vis-
ible in the drum.
The indicator Á
(RINSE) flashes.
Drainage hose bent. Remove the bend.
Maximum pump head (outlet
head 1m from unit's floor
surface) exceeded.
Consult Customer Service.
They can supply a retrofit kit
as a special accessory for de-
livery heads of more than
1m.
Solution pump blocked.
Switch off the unit and pull
out the mains plug. Clean
the solution pump.
If a siphon is connected: Si-
phon blocked.
Clean the siphon.
Problem Possible Cause Remedy