Filter
Top Products
Operating Instructions
33
The main door cannot
be opened while the
appliance is turned on.
The main door is locked be-
cause of a high water level or
a high temperature. The dis-
play
K
(DOOR) is not lit.
Wait until the indicator
K
(DOOR) lights up green.
Should it nevertheless be
necessary to open the main
door:
Turn the programme knob to
I (OFF); turn the pro-
gramme knob to C (PUMP
OUT). Press button O/s
(START/PAUSE). The main
door can be opened after the
water has been pumped out.
Power failure! (All displays
have gone off.)
For safety reasons the door
remains locked for 4 to 5
minutes.
If water can be seen through
the window in the door, first
carry out emergency empty-
ing (see section „Carrying out
emergency drainage“).
After approx. 4 to 5 minutes
the door can be opened
again by pulling the handle.
Washing detergent
residues form in the
washing detergent
drawer.
Water valve not fully opened. Open the water valve fully.
Filter in the screw connec-
tion of the intake hose on
the water valve or on the
unit is blocked.
Close the water valve. Un-
screw the intake hose from
the water tap and from the
unit. Clean the filter.
The rinsing water is
murky.
The cause is probably a de-
tergent with a high silicate
content.
No negative influence on the
rinsing result, possibly use
liquid detergent if necessary.
The corresponding
display does not light
up when one of the ad-
ditional program but-
tons is pressed.
The selected additional
program cannot be
combined with the set
program.
Make another selection.
Problem Possible Cause Remedy