52
A. SINGLE COIN ONLY
For ALL dryer models except AD-26/AD-295 and AD-540/WDA-540. (For Single Coin models AD-26/
AD-295 and AD-540/WDA-540 refer to
page 54).
PL01 - °FAr - Temperatures in Fahrenheit
tInE - Timed mode
Grd - Anti-wrinkle guard on
bUZ - Anti-wrinkle guard buzzer (tone) on
Coin - Coin(s) required to start
FLS - Display will flash in intervals between “FILL” and “Amount To Start”
bCrS - Bad coin reset
AtIn - Accumulative time
nSEn - Rotational sensor not selected
PL02 - PdrY - Percent Dry - 97%
PL03 - HI°F - 180°
PL04 - HICd - Temperature - 100°, Time - 2 minutes
PL05 - LO°F - 120°
PL06 - LOCd - Temperature - 100°, Time - 2 minutes
PL07 -PP
O
F - 150°
PL08 - PPCd - Temperature - 100°, Time - 3 minutes
PL09 - LCdE - Left coin denomination - 25¢
PL10 - rCdE - Right coin denomination - 25¢
PL11 - tFAS - Time for amount to start -10 minutes
PL12 - AtSt - Amount to Start - 25¢
PL13 - AFAt - Amount for additional time - 25¢
PL14 - Adrt - Automatic dry maximum time - 30 minutes
PL15 - GdLY - Anti-wrinkle guard off delay time - 2 minutes
Gont - Anti -wrinkle guard on time - 20-seconds
PL16 - AGt - Active anti-wrinkle guard time - 10 minutes
PL17 - A and b - “A” is adjustable from 1 to 99 (example: A = 5)
Factors - “b” is adjustable from 1 to 99 (example: B = 75)