A SERVICE OF

logo

02_ContInstallPortsLPR&RAW.fm Modified: 8/7/02
Template Version 1.0
64 GL-1020 Operator’s Guide (Basic)
3 If you are setting up an LPR port, enter dssc for the Queue
Name under LPR Settings and check
LPR Byte Counting
Enabled
.
If you are setting up a Raw port, ensure that the Port Number
under Raw Settings is 9100.
4Click
SNMP Status Enabled then click OK.
5Click
Next to proceed.
6 Review your port settings and click
Finish.
Add Standard TCP/IP Printer Port Wizard
7Click Close to return to the Properties window.