OPERATION
Group PrintingFrom DifferentOriginals (Memory Mode)
6,
7.
8.
9.
Press the Enter key again. The memory returns to Memory 1.
0
If you store the number of prints for 6 originals, the memory number returns to 1. It is not
necessary to press the Enter key,
Set the originals face down on the
original table.
0
The originals are fed from the bottom of
the stack. Make sure that the originalsare
set in the correct sequence with the first
original (Memory 1) on the bottom.
Press the Master Making key. Cheek the image position by making prints with the Proof
key.
0
If the image positionis not correct,adjust it usingthe Image Position key (See page 24) or the
side plate fine adjustment dial (See page 25).
Turn on the power switch of the
optional tape dispenser.
10. Press the Auto Cycle key.
~
The Auto Cycle indicator will light.
Cl In the Auto Cycle mode, printingstarts automatically after a trial printis delivered.
11. Press the Print Start key.
O After the last page of each printingset isfed out to the paper delivery table, the tape dispenser
drops a strip of paper onto the top of the paper stack if you have the optional tape dispenser.
The next group printingcycle beginsautomatically.
34
